FT-2900R, FT-7800R, or FT-7900R to Signalink USB Configuration |
A local fellow Amateur Radio Operator has a Signalink USB configured for a TenTec Jupiter; which he wants to connect the Signalink to a FT-7800R Mobile Radio. |
Default TenTec Jupiter to Signalink USB Jumper and Cable Configuration |
The Wiring Configuration shown below applies to the FT-2900R, FT-7800R, and FT-7900R Mobile Radios. |
Suggested FT-7800R to Signalink USB Jumper and Cable Configuration |
Suggested Cables Design |
Note: The drawn Cable Wires Colors are for illustrative purposes only. The actual Cable Wires Colors will be different. |
Radio Shack sells both a mono Cable [4202420, 6 feet, $4.99 or 4202420, 6 feet, $5.99 (see below for details)] and a stereo Cable [4200961, 3 feet, $1.47]. Date of Prices - 22.Oct.2015. |
Option: Once the Cables are made and tested - OK, consider adding some Epoxy, such as BJ Weld, into the open Ends of the RJ-45 and RJ-12 Connectors, where the Cable(s) enters the Plugs. If you do, let the Epoxy cure at least 24 Hours. |
Below are examples of how to cut the mono and stereo Cables. |
Radio Shack - Stereo Cable [4200961, 3 feet] |
Radio Shack Stereo Cable before being cut |
Radio Shack - Stereo Cable [4200961, 3 feet] cut to Dimensions |
Radio Shack Stereo Cable after being cut |
Radio Shack - Mono Cable [4202420, 6 feet] |
Radio Shack - Mono Cable [4202420, 6 feet] cut to Dimensions |
Radio Shack Mono Cable after being cut |
If you wish to listen to the Sounds from the Radio as they are being sent into the Signalink USB, you can plug an external Speaker into the Signalink USB's AUX Jack. |
You can solder a Speaker to the above 'put aside' cut Portion of the mono Cable. This is shown below. |
Return to KF3G |
Created 20.10.2015, Modified: 30.10.2015 ©2008 - 2099, Alle Rechte vorbehalten, SJWL |